At should be done if the steel pipe processed by the die threading machine is out of alignment?

Here's how to solve the issue when the steel pipe processed by the die threading machine is out of alignment:
1.Check if the die size of the die threading machine matches the specification of the steel pipe to be threaded. Replace the correct die promptly if they are not consistent.
2.Inspect the dies for wear or damage. Replace them immediately if wear or damage is found.
3.Place the steel pipe to be threaded into the chuck. When impacting, check if the pipe is loose and not clamped tightly, which may cause offset. Adjust promptly if offset occurs.
4. Check if the fixture and spindle are concentric. Adjust them promptly if they are not concentric. 5. Check if the rolling dies show severe wear. Replace them promptly if worn. The above solutions are provided for the problem of misalignment in the die threading machine. Hope they are helpful.