Advantages and uses of round steel threading machines

Advantages of Multi-functional Round Steel Tapered Pipe Threader:
1. High cost-performance ratio. The cost-performance of the round steel tapered pipe threader is mainly reflected in its use of standard round dies commonly available on the market, which are easy to purchase and at a low price.
2. The manufacturer ensures production quality.
3. It breaks the length limit of round steel, which is also the biggest advantage of the round steel tapered pipe threader.
4. The round steel tapered pipe threader has a high speed in making threads, significantly improving the work efficiency of construction teams.
5. Simple operation. Simple operation also greatly helps in improving work efficiency.
The round steel tapered pipe threader can also automatically spray coolant onto the dies, among other features.
Precautions for Using Multi-functional Round Steel Tapered Pipe Threader:
1. Before using the threader, perform a no-load test run. Only start formal operation after confirming it runs normally.
2. The forward-reverse switch of the threader should be installed in an easily accessible position and must be safe and reliable.
3. The threader generally operates at low speed. For those with a gearbox, select an appropriate speed based on the quality of the threaded pipe produced. Do not accelerate step by step to prevent burrs or deformation of the pipe end. Keep the oil level in the gearbox within the specified range.
4. Do not use hammering to tighten or loosen the stop block on the back, the feed handle, or the movable scale of the pipe threader. When threading long pipes, the end must be padded and placed flat to prevent swinging. After threading is complete, loosen the feed handle, the back stop block, and the pipe clamp, then slowly withdraw the pipe to avoid damaging the threads.
5. The pipe threader forms threads in one go. Add oil to cool and lubricate the threading area each time to ensure the surface smoothness of the threads and extend the life of the dies.
6. After using the pipe threader, cut off the power promptly, clean up the chips, and remove oil stains from the machine. For long-term non-use, apply oil and store it properly.
When operating the multi-functional round steel tapered pipe threader, first place the pipe to be threaded into the pipe chuck, secure it by impact, press the start switch, and the pipe will rotate with the chuck. Adjust the opening size of the die head and set the length of the thread. Then turn the feed handle clockwise to bring the die blade on the die head into tight contact with the end of the rotating pipe with constant force. The die blade will automatically cut and thread. Meanwhile, the cooling system automatically sprays oil to cool the die blade. When the thread reaches the preset length, the die blade will automatically open, indicating the end of threading. Turn off the power, release the chuck by impact, and remove the pipe.